Bando TL40-S14M-40 STS TL Timing Belt Pulley (3020) LOCKSBando TL40 S14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
L35-282-25 Parts
Bando - 10-3VX560 Power Ace® Cog Combo
Amperes 111 A LRC 5
4 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 0748M Mounting Arrangement F1 Number of Poles 4 Overall Length 19
8 NEMA NOMINAL EFFICIENCY 82
Standard NEMA MG-1 Frequency 60 Hz Voltage 200 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 10 HP Mounting F-2 Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC Electric Motors
9x(Code G) No load current 96
75 RPM 1780//1480 HZ 60//50 SER
7 POLES 6 NUMBER SPEEDS 1 RPM 1170 RPM 2 1170 RPM 3 1160 HERTZ 60 VOLTS PRIMARY 208-230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 FRME 215 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE SE OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6208-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
Bando - 400-S8M-1160 HP Anticipating the demand for energy savings and higher horsepower transmission
weight³ 618 lb Efficiency
Output HP1/4-1/6-1/8 Hp
