POLINI Premium Variator Roller Set 15x12mm- 3.5-4.0-4.5-5.0g Filter And Box Fixings

POLINI Premium Variator Roller Set 15x12mm- 3.5-4.0-4.5-5.0g Filter And Box FixingsThe centrifugal weights in the variator are a wearing part and must be replaced at regular intervals depending on the load (wear check approx. every 5000km). A wear of the rollers is characterised by a flattening on one side, the rollers can then no longer slide properly in the variator's raceway. This results in poor acceleration and often a lower final speed as the variator can no longer be fully extended due to the reduced diameter of the rollers.

These items are then further tested

The cylinder head will need opening out to 70

64mm x 12mm

you can depend on the exhausts in the ROAD series

The bgm PRO intake manifold is specially designed for the bgm PRO Racetour cylinder kit

Cylinder Kit - 50cc - Standard - 10 008 0050 - 40mm - Minarelli Liquid Cooled

a voltage peak is triggered which triggers the CDI and releases the ignition signal

Only rotary valve controlled Vespa engines usually run significantly leaner (120-125)

Requires hole drilling in each panel panel

Carburettor Dellorto PHF A Gasket Set 52514

BGM PRO brake shoes with lining material 'MADE IN GERMANY'QUALITY/B>BR>The bgm Pro brake shoes are manufactured exclusively for bgm by one of the most renowned Italian brake lining manufacturers

Vespa PX T5 PK Electronic Stator Plate Pick-up Unit - Ducati Spec 112 Ohm